“We use premium, high quality timbers from FSC accredited forests to manufacture our luxury hardwood windows.”
Hardwood windows are the ultimate in quality and durability. The types of hardwood which are used for windows have closed, beautiful grain structures and unlike softwoods are naturally durable.
The hardwood timbers we used are considered to be “Class 2 – Durable”, meaning that it would be expected to last 15 to 40 years if installed above the ground, even when unpainted and exposed to the weather. Redwood, which is probably the most commonly used timber for softwood windows in the UK.
Some of our Windows (Different styles / colours of Hardwood Windows)
Below are just some of our casement Windows, visit the gallery to see the full range.
Hardwood Window Prices & Sizes
Please call us to discuss sizes and prices, we supply all standard and non standard sizes, prices are available by quote. Please find a rough cost per size table below. * Based on a single window
Our Hardwood windows are manufactured to high standards with specifications to match, generic specifications are below (specification relative to design).
- Standard and Made to Measure Sizes
- Single, Double and Triple Glazing
- Bar Design Options
- Engineered using laminated timbers which increases product durability, lifespan and reduces maintenance
- Espag Locking Window Gear
- Height up to 3 meters
- Finished products in white or other colours
- Traditional or Contemporary Ironmongery Features
- Full Instructions for Self Assembly and Installation
- Twin gasket system for weatherproofing
- Increased ventilation with lockable mechanisms on Open windows
- Flush window systems available
- Fully tested and approved gaskets and seals
- Glass is toughened
- Good thermal performance (minimal heat loss)
- Good security performance (thanks to effective locking mechanisms)
- Good weather performance (durability against weathering, heat loss, UV damage)
- Good Acoustic Performance
Trade Hardwood Windows
We supply this product to traders and:
- Property Developers
- Property Renovators
- Commercial Businesses
If you have a trade enquiry or would like to order this product in bulk then please call us on 0843 886 7763 to discuss or fill out the call back form to the right.
Our lead times vary depending on product specification and volume. We aim to have the shortest possible lead time from order to delivery, call us for a free quotation / estimate.
Below is some of our colours and stains available. We offer over 100 different colours and variant stains. We also offer a colour matching service if you have specific requirements.
Hardwood Window CAD Drawings
There are no CAD Drawings available for Download, please contact to request drawings.
Design, Manufacture and Delivery
All of our Hardwood Windows are designed and manufactured in the UK using FSC sourced wood. Once manufacture has been completed the item will be sent and delivered shortly after. Products are all inspected thoroughly before being dispatched.
Our Hardwood Window Range Includes:
More about our Hardwood Windows
Hardwood windows are the ultimate in quality and durability. The types of hardwood which are used for windows have closed, beautiful grain structures and unlike softwoods are naturally durable. Durability is an often misunderstood term when it comes to timber – when we mention durability we are not talking about how hardwearing it is, but how resistant it is to fungal rot and attack by insects. Wood-destroying insects are not a widespread problem in the UK, but rot certainly can be, due to our temperate climate and often harsh and wet weather.
The hardwood timbers we used are considered to be “Class 2 – Durable”, meaning that it would be expected to last 15 to 40 years if installed above the ground, even when unpainted and exposed to the weather. Redwood, which is probably the most commonly used timber for softwood windows in the UK is considered to be “Class 4 â€“ Slightly Durable”, which gives it a life expectancy of 0 to 7 years if installed in the same conditions as above. Of course, these figures are for unpainted timbers, and painted timbers will last much longer, but this should give some idea of the difference in natural durability between hardwoods and softwoods.
Manufacturers attempt to overcome the low durability of softwoods by impregnating or coating the timbers with an anti-fungal preservative treatment, which increases the lifespan of the timbers, however this treatment only ever penetrates a few millimetres into the surface of the timber, meaning that wherever the timber is screwed into or cut on site after treatment, the protective treatment is compromised giving opportunities for rot to take hold.
Once a window starts to rot, it can be difficult to repair in a cost-effective and visually pleasing way â€“ often the repairs involve cutting out rotten material and splicing in new timbers, which will always leave a visible joint between the old and new timbers, especially as the separate pieces of timber expand or contract by different amounts when exposed to moisture or differences in ambient temperatures.
Since hardwood timbers essentially produce and contain their own preservative compounds during growth, they are naturally durable and are protected through to the core even without a preservative treatment. This means that screwing into or cutting the timbers after painting does not pose an inherent risk in terms of the continued durability of the products.
On top of the timber’s natural durability, our hardwood windows are coated with the latest in microporous paints and stains which ensure that the windows will have a long-lasting, beautiful finish. Our range of translucent stains work to show off the beautiful grain of the hardwoods we use, this is something which really can’t be replicated with softwood timbers.
Another benefit of hardwood timbers over softwood is that our hardwood windows are stronger than softwood windows when it comes to supporting loads in structures such as conservatories and orangeries. This is important because it allows us to use thinner timber components to achieve the same strength, and in some cases allows us to manufacture larger buildings before the introduction of additional reinforcing elements such as roof tie bars or in-built structural steels is required.
If you are interested in our window products, or would like a free quotation, please fill out our callback request form, or call us on 0843 886 7763.
Windows & Doors UK have experienced designers who can help you with the design and style aspects of your hardwood windows. From frame style to woodwork, from ironmongery options through to installation our designers can assist.
CAD drawings are produced outlining the windows dimensions, design and functionality aspects.
Decorative ironmongery for Windows can play an important part in the overall look of new timber windows and doors. We source and provide a range of ironmongery options for windows and doors that complements the overall look and feel of the product.
From traditional to victorian, from modern to contemporary styles, you choose the handle style that fits your preference and we’ll ensure your windows and doors come supplied.
If you are looking to replicate an existing window style for your new hardwood windows then please give us a call on 0843 886 7763 to discuss your replica window requirements.
Some historic windows can (depending on age) be hard to find parts for, or may be beyond economical repair, at which point, replica windows are ideal to replace with a like for like style with new materials and parts.
If you have purchased windows from us and would like to leave us a testimonial please e-mail firstname.lastname@example.org with the subject “Testimonials for Windows and Doors UK”.
Windows & Doors UK make ordering a straightforward process. Once you have chosen your window / door product and have agreed the drawings / specifications and design the product will be scheduled for manufacture. Your products will be delivered by a scheduled date through recorded delivery.